Werbung
When
Always ensure that chemical manufacturers
Only use chemicals recomended for use in auto scrubber-driers,
Chemical
dosing
The TTV-67B ride-on scrubber drier has an optional automatic chemical-dosing
Simply fill the •l litre chemical
operator, depending on the floor and cleaning conditions,
To fill the chemical-dosing
bottle cap (fig-25) and fill with appropriate cleaning chemical. Replace bottle cap, refit dosing bottle (fig-26)
and carefully lower waste-water tank.
After use, ensure the chemical
The dosing
Pipes
Note: always
ensure
15
handlinq
and mixinq
chemicals.
System
dosing bottle and the machine
Fig.24
bottle, first lift up the waste-water
dosing
tank is emptied,
also need to De Cleaned
that the waste-water
safety guidlines are followed.
will deliver the correct
.25
tank (fig. 24), remove the dosing bottle, unscrew the
cleaned and refilled
and flushed
through
with clean
tank is empty
before
235670
05/11
system.
mix ratio as set by the
with clean water.
water
for at least 60 seconds
lifting.
Werbung
