Depstech DS590 Bedienungsanleitung Seite 9

Copy Photo And Video Files To Computer
1. Use a TF card reader to copy data directly.
2. Use a Type-C cable to connect to computer for copying Setting path.
1. Please connect the product to your computer.
2. Press the button to enter the menu.
3. Select "Data transmission".
4. Press the button to start copying to computer.
If the device is not connected with computer, click
interface, then USB icon shows up on the display; Please press the
"NO SIGNAL"
It is normal for
to exit data transmission.
1. Connect the device to the DC 5V adapter for charging;
2. The red indicator light flashes when the device is charging, and is always on
when fully charged.
Guide For Accessories Installation
Please note that the positioning wire on the end of the connector needs to be
aligned with the red dot on the device connector in order to be inserted. Then turn
the aluminum ring clockwise to tighten it.
Card Reader
TF
Card
to appear on the screen when you press the
Charging Instructions
- 07 -
"Data transmission"
on the setup
button to exit.
button