Additional Safety Requirements For Working With Reciprocating Saws - Dnipro M Sr-210 Rx Betriebsanleitung

attached to a rotating part can cause
injury.
– Maintain stability and balance while
working. This ensures reliable control
of the power tool, especially in unpre-
dictable situations.
– Do not wear loose clothing or jewel-
ry while working. Keep hair and cloth-
ing away from moving parts of the
power tool. Loose clothing, jewelry, or
long hair can get caught in the moving
parts of the power tool.
– If there are means for connecting dust
extraction or collection devices, cor-
rectly connect and use these devic-
es. The use of such devices reduces the
risks associated with dust.
– Avoid overconfidence that may arise
from regular use of the power tool.
Overconfidence leads to careless ad-
herence to safety principles and even
their disregard. Any carelessness while
working with a power tool can result
in serious injury in a matter of seconds.
Using an electric tool and taking
care of it
– Do not overload the power tool. Use
the power tool for its intended pur-
pose. A properly selected power tool
will perform better and safer for the
tasks it is designed for.
– Do not use the power tool if the switch
does not provide proper on/off func-
tionality. Any power tool with a faulty
switch is dangerous and should be re-
paired.
– Before any adjustments, changing at-
tachments, or packing the power tool
for storage, always unplug it from the
power source or remove the battery.
These precautions reduce the risk of
accidental activation of the power
tool.
– Keep the power tool in a place inacces-
sible to children and do not allow in-
dividuals who are unfamiliar with the
safety and operating instructions to
use it. In the hands of an unfamiliar
user, a power tool is very dangerous.
– Take care of the power tool and its at-
tachments. Check for any misalign-
EU-SR1123001-1123001
ment, jamming of moving parts, break-
age of components, or other defects
that may affect the operation of the
power tool. In case of damage to the
power tool, contact the manufacturer
(DNIPRO M LLC), the DNIPRO-M autho-
rised service centre or the seller of the
product. Most accidents are caused by
faulty power tools.
– Keep cutting attachments clean. Prop-
erly maintained cutting attachments
with sharp cutting edges are less prone
to binding and perform better.
– Use the power tool, attachments, etc.,
in accordance with this instruction
manual and considering the conditions
and type of work. Using power tools
for tasks they are not intended for can
lead to hazardous situation.
– Keep the handles and gripping surfac-
es clean, preventing the accumulation
of oil or grease on them. Slippery han-
dles and gripping surfaces do not pro-
vide secure control of the power tool.
Maintenance
– For service and repair of the power
tool, contact the manufacturer (DNI-
PRO M LLC), the DNIPRO-M authorised
service centre or the seller of the prod-
uct. This will ensure the safety and
proper functioning of your electrical
equipment.
2. ADDITIONAL SAFETY
REQUIREMENTS FOR WORKING
WITH RECIPROCATING SAWS
– Hold the power tool only by insulat-
ed surfaces of the housing when work-
ing in situations where the saw blade
may come into contact with concealed
electrical wiring or its own power cord.
If the saw blade contacts an energized
wire, the accessible metal parts of the
power tool may become energized and
cause electric shock to the operator.
– Use clamps or other appropriate means
to secure the workpiece to a stable
base. Holding the workpiece by hand
or other body parts may result in loss
of control.
en
5