Troubleshooting
Fault
The appliance is not
working
The appliance turns on,
but the temperature is
too high/ low
The appliance is
unusually
loud
EN
Probable Cause
The unit is not switched
on
Plug and lead are
demaged
Power supply
Internal wiring fault
Too much ice on the
evaporator
Condenser blocked with
dust
Doors are not shut
properly
Appliance is located near
a heat source or air flow
to the condenser is being
interrupted
Ambient temperature is
too high
Unsuitable foodstuffs are
being position stored in
the appliance
Appliance is overloaded
Loose nut/screw
The appliance has not
been installed in a level
or stable position
Action
Check the unit is plugged
in correctly and switched
Call your agent or
qualified technician
Check power supply
Call your agent or
qualified technician
Defrost the appliance
Call your agent or
qualified technician
Check doors are shut and
seals are not damaged
Move the refrigerator to
a more suitable location
Increase ventilation or
move appliance to a
cooler
Remove any excessive
hot foodstuffs or
blockages to the fan
Reduce the amount of
food stored in the
Check and tighten all nuts
and screws
Check installation
position and change if
necessary