Introduction For your safety, read the manual carefully before assembling or using
this product. Save this manual for future reference.
Please take a few moments to carefully read through this manual. Correct
maintenance and operation of this machine will provide the best possible
performance from your product.
Safety Tips
Position on a flat, stable surface.
•
A service agent/qualified technician should carry out installation and any
•
repairs if required.
Do not remove any components or service panels on this product.
•
•
Consult Local and National Standards to comply with the following:
Health and Safety at Work Legislation
o
o
Fire Precautions
o
IEE Wiring Regulations
o
Building Regulations
The appliance is intended for normal household use or similar use (e.g., to be
•
used by a layman in shops).
DO NOT use the appliance outside.
•
DO NOT attempt to service the item yourself.
•
DO NOT use damaged appliances. If you are in any doubt, consult a service
•
agent.
The unit must be installed and located in accordance with the manufacturer's
•
installation instructions.
Installation work must be performed in accordance with the National Electric
•
Code by qualified and authorized personnel only.
•
To reduce the risk of flammability, repairs and replacement work must be
performed by a qualified and authorized service professional using only
genuine replacement parts (Component parts shall be replaced with like
components).
•
Do not use an extension cord or an adapter plug. Due to potential safety
hazards, we strongly advise against using an extension cord or adapter plug.
•
DO NOT use electrical appliances inside the appliance (e.g., heaters, ice-
cream makers), unless recommended by the manufacturer.
Keep ventilation openings in the appliance enclosure or built-in structure
•
clear of obstruction.
DO NOT use mechanical devices or other means to accelerate defrosting
•
other than recommended by the manufacturer.
DO NOT damage the refrigerant circuit.
•
EN