Profi Cook PC-KA 1169 Bedienungsanleitung Seite 11

• Increase aroma strength by pressing the MODE button
several times.
- The adjusted aroma strength will be saved for future
brewing operations.
Switching on the Coffee Machine Directly
Please follow the instructions under points "Preparing the
Coffee Machine".
7. Press the ON / OFF button once. The appliance com-
mences operation immediately using the previously
selected aroma strength. The indicator light shines red.
- The appliance switches off automatically about
35 minutes after the brewing. The control lamp goes
out. The appliance is once again in standby mode.
- If you yourself would like to shut off the appliance
beforehand, press the ON / OFF button twice.
Automatic Operation
Please follow the instructions under points "Preparing the
Coffee Machine".
7. Press the PROG button twice. " TIMER " appears above
the time on the display.
8. Set the start time with the HOUR and MIN buttons. Wait
until the appliance has left the setting mode. The indica-
tion " TIMER " in the display goes out.
WARNING:
• Always pull the mains plug out of the socket before cleaning
and maintain until the appliance has cooled down.
• Do not immerse the appliance in water. It could cause an elec-
tric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Clean the outside of the appliance with a slightly damp
cloth if necessary – without any additives.
• Use a paper towel to remove any coffee grounds that
may have spilled into the inner housing. Wipe with a
damp cloth.
• Clean the jug and the filter holder in warm rinsing water
with a little hand dishwashing liquid. If necessary, use a
soft brush.
PC-KA1169_IM_11.2023
9. Press the ON / OFF button twice to start the TIMER
operation. The control lamp lights up blue.
- The appliance switches on automatically at the pres-
ent time. The control lamp lights up red.
- Press the ON / OFF button once to deactivate TIMER
operation. The control lamp goes out.
- If you would like to start the brewing process sooner,
press the ON / OFF button twice. The control lamp
lights up red.
After the Brewing Process
• When no more coffee is flowing through the filter you can
remove the jug.
• Turn the appliance off.
• Would you like to keep the remaining coffee warm?
Leave the appliance turned on until the end of the
keep-warm period. If you wish to keep the coffee warm
even after the keep-warm period has finished, pour the
remaining coffee into a thermal flask.
• The filter holder can be pulled out of the appliance by its
handle. This makes it easier to dispose of the old coffee
filter, for example.
Cleaning
De-scaling becomes necessary when the preparation time
increases significantly.
• Only use commercially available citric acid-based
de-scaling agents for de-scaling.
• Dose as indicated on the packaging or instruction leaflet.
• Place the jug or another suitable container on the stor-
age surface.
WARNING:
• Then boil fresh water three to four times to rinse out
any residue of the descaling agent.
• Do not use coffee powder!
• Do not use this water as drinking water.
De-scaling
07.12.23
11