Powerfix Profi 280335 Baueinleitung Seite 7

... / Assembly / Cleaning and storage / Disposal / Warranty and Service
Balance the workbench on uneven ground with
the aid of the adjustable feet.
Check the load-bearing capacity of the wall
before mounting to the wall.
The maximum load weight of the
work surface amounts to approx.
150 kg
150 kg.
The maximum load weight of a
hook with a total length under
1 kg
50 mm amounts to approx. 1 kg.
The maximum load weight of a
hook with a total length over
1 kg
50 mm amounts to approx. 1 kg.
The maximum load weight of the
pegboard amounts to approx. 25 kg.
25 kg
Assembly
Note: Familiarise yourself with the product prior to
assembly. Carefully read the following assembly
instructions and safety advice.
Incorrect assembly will void any warranty, particu-
larly with respect to consequential damages.
Caution: Only use this workbench if it has been
screwed/secured to a wall beforehand.
The bolt anchors supplied to secure the workbench
to the wall are only suitable for concrete or solid
brick walls. All other walls such as lightweight walls
require a special fixing material (not included in the
scope of delivery). If necessary, consult a specialist
retailer.
Required tools:
1 cross-tip screwdriver
2 combination wrenches 10 mm
Note: To mount to a concrete or solid brick wall
you will need a ø 10 mm masonry drill and a suita-
ble power tool.
We recommend assembling this product with
2 people.
280335_Werkbank_klappbar_Content_OS.indd 11
Constructing the workbench
Construct the workbench as depicted in
Diagrams A to D.
Option Diagram BII
Using the screws the pegboard
B8
mounted at a height. Use the mounting holes
located at a higher level in the wall bracket for
this purpose.
Folding up the workbench
Fold up the workbench as depicted in
Diagrams E to H.
Cleaning and storage
Do not use any solvent-based, alkaline or
acidic cleaning agents as these could damage
the product.
Clean the workbench with a damp, soft cloth
and, if necessary, a mild detergent.
Only store the product in a dry location.
Disposal
The packaging is made from environ-
mentally friendly materials which can be
disposed of through your local recycling
facilities.
Contact your municipality for information on how
to dispose of your worn-out product.
Warranty and Service
The product has been manufactured to strict quality
guidelines and meticulously examined before deliv-
ery. In the event of product defects you have legal
rights against the retailer of this product. Your legal
rights are not limited in any way by our warranty
detailed below.
may be
B1
GB/IE 11
17.08.16 08:04