Herunterladen Diese Seite drucken

Werbung

GB /IE
Introduction
Congratulations!
With your purchase you have decided in favour of a
quality product. Familiarise yourself with the product
before taking it into use. To do this, read the following
operating instructions attentively. Use the product only
as described and only for the specified areas of appli-
cation. Retain these instructions for future reference. In
addition, pass these documents on, together with the
product, to any future owner.
Intended use
The storage set is intended exclusively for the storage
of tools and small parts such as nails, wallplugs, screws
or similar items, in private households. This storage set
is not intended for the storage of flammable, toxic or
corrosive liquids. Do not use this storage set in or for
commercial applications, or for purposes for which
it was not intended. A different or additional usage
is considered to be improper use and can lead to
damage. The manufacturer assumes no responsibility
ORGANISING & STORAGE SET
for damage caused by failure to comply with these in-
POAS 2 B1
structions, improper use, incompetent repairs, making
unauthorised modifications or for using unapproved
replacement parts.
ORGANISING & STORAGE SET
Safety instructions
Operating instructions
For safe interaction with the item pay heed to the
following safety information:
OPRUIM- EN OPBERGSET
Gebruiksaanwijzing
When drilling, ensure that damage is not caused
to any electrical cables or other installations, such
ORDNUNGS- UND AUFBEWAHRUNGS SET
as water pipes, in the wall. Drilling into electrical
Bedienungsanleitung
wires can be fatal!
Damaged parts could have sharp edges. There is
also a risk of physical injury! Replace broken or
damaged parts forthwith.
Do not burden the wall panels and the boxes too
heavily (see chapter "Technical Data"). This could
lead to irreparable damage.
The supplied wallplugs are only suitable for inser-
tion into a concrete or stone wall. It is absolutely
important that you check the suitability of your ma-
sonry before inserting the wallplugs. If you do not,
the wallplugs may not hold and the wall panels
could fall off. If in doubt, consult a professional.
IAN 273437
- 1 -
Technical data
Maximum load per wall panel
32 kg
Maximum load - small box
1 kg
Maximum load - medium box
1.5 kg
Maximum load - large box
2 kg
Items supplied
Before taking the item into use, check that all of the
parts are complete/available and free of visible
damage. If the items supplied are not complete, or
damaged due to defective packaging or through
transportation, contact Customer Services (see chap-
ter "Importer/Service").
Fig. 1
2 x Wall panels (42 x 59 cm)
12 x Boxes small (red) (11.5 x 10 x 7.3 cm)
8 x Boxes medium (blue) (16.5 x 10 x 7.3 cm)
4 x Boxes large (yellow) (21.5 x 10 x 7.3 cm)
1 x broad box (blue) (8.3 x 28.3 x 6.5 cm)
12 x Hooks (5 cm)
1 x Drill and bit holder (16.5 x 5 cm)
1 x Ring and open-ended spanner holder
(21.8 x 6.8 cm)
1 x spray can holder (8.5 x 23 x 6.5 cm)
1 x pen box (Ø 3.9 x 7 cm)
40 x Screws M5 x 30
Fig. 2
40 x Wallplugs S6
This information sheet
Mounting the boxes
You will need a free slot in the wall panels for a box
Assembly
(small/medium/large). For the broad box, you will
need two adjacent slots.
Installing the wall panels
Insert the box from above into the open slot such
Draw a straight line on the wall so as to align the
that both/three hooks engage in the wall panels
wall panels with it (see Fig. 1).
(see Fig. 3).
Hold the wall panels against the wall and, using
a pointed object, mark the boreholes through the
screw positions.
Drill the holes and insert the supplied plugs into
them.
Screw the wall panels to the wall with at least 10
screws each (see Fig. 2).
- 2 -
- 3 -
Fig. 3
Securing the hooks
For 10 hooks you need at least two slots. Up to five
hooks can be attached to one slot.
Insert the hook from above into the slot (see Fig. 4).
Fig. 4
Securing the drill and bit holder
Cleaning
For the drill and bit holder you need two adjacent slots.
Insert the drill and bit holder from above into the
IMPORTANT
slots such that both hooks engage in the wall
Do not use abrasive or aggressive cleaning
panel (see Fig. 4).
agents, these could damage the plastic parts.
Securing the ring and open-ended spanner
Clean the wall panels and the boxes with a lightly
holder
moistened cloth. For stubborn soiling use a mild
For the ring and open-ended spanner holder you
detergent on the cloth.
need two slots lying adjacent to each other and five
slots one above the other.
Disposal
Insert the two ring and open-ended spanner hold-
Dispose of the appliance via a registered waste dis-
ers from above into the slots such that both hooks
posal firm or at your local community waste disposal
engage in the wall panel (see Fig. 4).
facility. Pay heed to the currently applicable regula-
tions. In case of doubt, please contact your waste
Attaching the spray can holder
disposal centre.
For the spray can holder, you will need three adjacent
Dispose of all packaging materials in an
slots.
environmentally friendly manner.
Insert the tool holder from above into the slots
such that three hooks engage in the wall panels
Importer / Service
(see Fig. 4).
KOMPERNASS HANDELS GMBH
Attaching the pen box
BURGSTRASSE 21
For the pen box, you need one free slot in the wall
44867 BOCHUM, GERMANY
panels.
Tel.: +49 (0) 2327 3018-0
Insert the pen box from above into the open slot
www.kompernass.com
such that the hook engages in the wall panels
IAN 273437
(see Fig. 4).
- 4 -
- 5 -
NL / BE
muur. Controleer voor de montage of uw wanden
Inleiding
geschikt zijn voor de pluggen. Anders houden
Gefeliciteerd! Met uw aankoop hebt u gekozen voor
de pluggen niet en het wandpaneel valt omlaag.
een hoogwaardig product. Maak uzelf voorafgaand
Vraag een vakman om advies in geval van twijfel.
aan de eerste ingebruikname vertrouwd met het
product. Lees hiertoe aandachtig de volgende bedie-
Technische gegevens
ningshandleiding. Gebruik het product uitsluitend op
de voorgeschreven wijze en voor de aangegeven
Maximale belastbaarheid per wandelement
doeleinden. Berg deze gebruiksaanwijzing zorgvul-
dig op. Geef alle documenten mee als u het product
Maximale belastbaarheid box klein
doorgeeft aan een derde.
Maximale belastbaarheid box gemiddeld
Gebruik in overeenstemming met
Maximale belastbaarheid box groot
bestemming
De opruim- en opberghulp is uitsluitend bestemd voor
Inhoud van de verpakking
het opslaan van gereedschappen en kleine voorwer-
Controleer de inhoud van het pakket op volledigheid
pen, zoals spijkers, schroeven en dergelijke, ook in
en eventuele zichtbare beschadigingen voor inge-
het privé-huishouden. De opruim- en opberghulp is
bruikname. In geval de levering niet compleet is, of bij
niet bestemd voor het opslaan van ontsteekbare, toxi-
schade door gebrekkige verpakking of door transport
sche of agressieve vloeistoffen. Gebruik de opruim-
neemt u contact op met de service (zie hoofdstuk
en opberghulp niet in de bedrijfsmatige omgeving
„Importeur/Service").
en niet voor doeleinden waarvoor het product niet is
2 x wandelementen (42 x 59 cm)
bedoeld. Een ander of verdergaand gebruik geldt als
niet in overeenstemming met de bestemming en kan
12 x box klein (rood) (11,5 x 10 x 7,3 cm)
leiden tot beschadigingen. De fabrikant is niet aan-
8 x box gemiddeld (blauw) (16,5 x 10 x 7,3 cm)
sprakelijk voor schade als gevolg van het niet in acht
4 x box groot (geel) (21,5 x 10 x 7,3 cm)
nemen van de gebruiksaanwijzing, gebruik dat niet
1 x box breed (blauw) (8,3 x 28,3 x 6,5 cm)
volgens de bestemming is, ondeskundige reparaties,
12 x haak (5 cm)
ongeoorloofd uitgevoerde veranderingen of gebruik
1 x boor en bithouder (16,5 x 5 cm)
van ongeoorloofde onderdelen.
1 x ring- en steeksleutelhouder (21,8 x 6,8 cm)
Veiligheidsvoorschriften
1 x spuitbushouder (8,5 x 23 x 6,5 cm)
Neem de volgende veiligheidsvoorschriften in acht
1 x box voor pennen (Ø 3,9 x 7 cm)
voor een veilige omgang met het product:
40 x schroeven M5 x 30
Let erop, dat u bij het boren geen elektrische leidin-
40 x pluggen S6
gen of andere installaties, zoals bijv. waterleidingen,
Deze gebruiksaanwijzing
in de wand beschadigd. Er is sprake van levensge-
vaar wordt er in elektrische leidingen geboord!
Montage
Beschadigde delen kunnen scherpe kanten hebben.
Montage van de wandelementen
Er bestaat letselgevaar! Vervang gebroken of
Teken een rechte lijn op de wand om de wandele-
beschadigde delen meteen.
menten daaraan te positioneren (zie afb. 1).
Belast de wandelementen en de boxen niet te
Markeer de boorgaten, door het wandelement
sterk (zie hoofdstuk „Technische gegevens").
tegen de wand te houden en met een puntig
Dit kan onherstelbare schade veroorzaken.
voorwerp door de schroefgaten heen de posities
De meegeleverde pluggen zijn alleen geschikt
te markeren.
voor de bevestiging in een betonnen of stenen
- 6 -
- 7 -
Boor de gaten en gebruik de meegeleverde pluggen.
Schroef de wandelementen met minstens ieder 10
schroeven aan de wand (zie afb. 2).
32 kg
1 kg
1,5 kg
2 kg
Afb. 1
Afb. 2
Montage van de boxen
Voor een box (klein/middel/groot) hebt u één vrije in-
steekplaats nodig in het wandelement. Voor de brede
box hebt u drie naast elkaar gelegen insteekplaatsen
nodig.
Steek de box zodanig van boven in de insteek-
plaats, dat beide/drie haken in het wandelement
grijpen (zie afb. 3).
- 8 -

Werbung

loading

Inhaltszusammenfassung für Powerfix Profi POAS 2 B1

  • Seite 1 Een ander of verdergaand gebruik geldt als for damage caused by failure to comply with these in- ► Do not use abrasive or aggressive cleaning POAS 2 B1 panel (see Fig. 4). ▯ 12 x Hooks (5 cm) niet in overeenstemming met de bestemming en kan ▯...
  • Seite 2 ■ DE / AT / CH ▯ Steek de box voor pennen zodanig van boven in ■ Die mitgelieferten Dübel sind nur für die Befestigung ▯ Bohren Sie die Löcher und verwenden Sie die Einführung de insteekplaats, dat de haak in het wandelement in einer Beton- oder Steinwand geeignet.