Aiper Seagull Plus Handbuch Seite 17

8. Precautions
1. The charging port is located on the top. Please turn off the machine
while charging.
2. Before charging, please check whether there is residual moisture in the
charging port. Make sure it is dry and there is no moisture before
inserting the charger.
3. Place the device into the pool right side up. Do not throw, drop, or sub-
merge the device upside down in your pool.
4. Whenthe upper shell rotor is blocked by debris such as dirt/ branches/
leaves/sand, etc., it can be cleaned after disassembly.
5. Ensure the waterproof rubber plug is securely fit into the charging port
before submerging the device in water. Failure to do so may lead to an
electrical shortage
6. After cleaning in a saltwater pool or a pool with a high pH water value,
rinse and clean the machine to prevent erosion.
7. Charging your Seagull Plus should only be done indoors, in a cool,
well-ventilated
perature environment, as this may overheat some of the device's more
sensitive internal components.
8. Please store the device indoors or in a cool place while not in use.
9. Non-professional technicians are prohibited from disassembling the
machine. Disassembly may cause irreparable damage to the entire ma-
chine and should
area. Do not charge in direct sunlight
be avoided at all costs.
14
A1 pars
or a high-tem-