Accessing Devices And Targets; Operating The Kvm Client; Shutting Down The Add-On - G&D Remoteaccess Installationsanleitung

Getting started

Accessing devices and targets

After the user login, the
Here, you can access a
NOTE: You can open or bring the
time by pressing
Ctrl+Alt+N
The is divided into three parts:
Port Navigator
Lists targets that you have marked as favourites.
 Favorite Access:
 Devices: List of all added
 Targets: Lists all added
How to establish a connection with a device or target:
1. Open the paragraph
2. Click on the device or target you want to open.
NOTE: Right-click on the device/target or on the
client options.

Operating the KVM client

After connecting to a device, the KVM client will display the video stream of the
device. You can operate the device using the keyboard and mouse connected.
NOTE: Detailed information on how to operate and configure the KVM client is
given in the separate operating manual.

Shutting down the add-on

You can shut down the
on the front panel of the device or via a menu.
How to use the Power button to shut down the add-on:
1. Briefly press the power button of the add-on.
IMPORTANT:
Do not turn off the add-on by holding down the power button or dis-
connecting the power cable!
How to shut down the add-on using the menu:
1. In the left corner, click on
2. Click on Leave > Shut Down
12 · G&D RemoteAccess-Workplace
window opens.
Port Navigator
RemoteAccess-GATE
Port Navigator
.
RemoteAccess-GATE
RDP , SSH , VNC , HTML
Devices or Targets .
RemoteAccess-Workplace
Main Menu .
.
add-on or any other target.
window to the foreground at any
add-ons
and ESXi targets
interface to open the KVM
add-on either via the power button