Start-Up; Status Displays - G&D Remoteaccess Installationsanleitung

Start-up

After the add-on is properly installed, you can start using it immediately.
How to use the Power button to switch on the add-on:
1. Briefly press the power button of the add-on.

Status displays

Two LEDs on the front panel indicate the operating status of the
place addon.
Description Colour
Blue
Power( )
Red
Hard disk( )
Status Meaning
On The device is supplied with power.
Off The device is switched off.
On Read/write access to the hard disk
Off The device is switched off or there is currently
no read/write access to the hard disk.
RemoteAccess-Work-
G&D RemoteAccess-Workplace · 7
Start-up