Drum Brake; Safety Belt; Collapsing; Storage - Drive Devilbiss Healthcare Multitec Gebrauchsanweisung

Drum brake

Safety belt

An optional safety belt can be added. The secures and
stabilizes the person sitting in the wheelchair. This effec-
tively prevents the person from tipping forward out of the
wheelchair.
The safety belt is fastened behind on the right and left to
the back tubing. This addition should be done in a spe-
cialized workshop.

Collapsing

Remove the seat and back cushions. Simply pull the
cushion off. Pull the locking pin on the back of the back-
rest out. You can now fold the backrest down.
For transport in a personal vehicle or simply to make
space, the backrest can be folded down. It then takes up
very little space and can be easily stored.
In addition, the drive wheels can be easily taken off.

Storage

When not in use for a longer period of time, the wheelchair
should be cleaned, folded and stored in its original card-
board box.
Drive Medical GmbH & Co. KG | As per: 28.06.2023 | Errors and alterations excepted
To achieve an optimal brak-
ing effect, the braking force
is adjusted with the adjust-
ing screw. The braking force
is enhanced by loosening
the adjusting screw.
Important!
Take care to adjust simulta-
neously on both sides of the
wheelchair.

Cleaning / maintenance / re-use

• Clean regularly with a moist cloth! Do not use any
aggressive cleaning agents!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws on the wheelchair regularly and tigh-
ten, if necessary.
• Check the condition of the tires regularly. They are
"fail-safe", meaning that you do not have to check air
pressure or fill them with air. Always check the tires for
tears or other damage, however.
• In case of defects, contact your DRIVE MEDICAL dealer.
• This product can be reused. Always follow the man-
ufacturer's instructions during preparation; these are
made available on request.
EN
23
Instructions for use MULTITEC