LANCOM 800+ Installationsanleitung Seite 24

LANCOM Routers, WLAN routers, access points and WLAN controllers
If the configuration computer does not retrieve its IP address from the
LANCOM DHCP server, it determines the current IP address of the computer
(with Start
Windows XP, Windows Vista, Windows 7 or Windows 8, or with command
ifconfig in the console under Linux) In this case, the LANCOM can be
accessed with address x.x.x.254 (the "x"s stand for the first three blocks in
the IP address of the configuration computer).
Network with DHCP server
If a DHCP server for the assignment of IP addresses is active in the LAN, an
unconfigured LANCOM device disables its own DHCP server, switches to DHCP
client mode and retrieves an IP address from the DHCP server in the LAN.
However, this IP address is initially unknown and accessing the device
depends on the name resolution:
7
Run cmd and command ipconfig at the prompt under
If the LAN also has a DNS server for name resolution and this
communicates the IP address/name assignment to the DHCP server, the
device can be reached under name "LANCOM-<MAC address>", e.g.
"LANCOM-00a057xxxxxx".
http://LANCOM-00a05700094A
First Steps