LANCOM 800+ Installationsanleitung Seite 20

LANCOM Routers, WLAN routers, access points and WLAN controllers
Never operate damaged components. Turn a device on only if the housing is
closed.
Opening the housing is reserved exclusively for the manufacturer's authorized
technicians. Never insert pointed objects (thin screwdrivers, wires, etc.) into
the product's interior. Risk from electric shock!
Any work required for the electrical installation must be carried out by a trai-
ned electrician.
Make sure that the electrical installation complies with local or national safety
requirements.
Installing the software
Deploying and connecting the device
C
3
If you are using a Windows computer for the configuration, you should
install the LANCOM Management System
LANmonitor on the data medium supplied with your product).
With other operating systems, you have the
browser.
When deploying/mounting the device
deployment, with particular regard to the environmental conditions,
stackability, etc., as outlined in the technical specifications in the
Hardware Quick Reference
In the case of LANCOM Wireless devices,
antennas if applicable.
LAN and WAN connectors
corresponding remotes.
When connecting the Ethernet interfaces, please ensure that the two
devices being connected (e.g. switch and LANCOM) both have the
same setting for auto mode. If a LANCOM is connected to a switch
that does not support auto mode, or if this function has been
deactivated in the switch, then auto mode must also be deactivated
First Steps
LCMS (LANconfig and
alternative of using a
consider the instructions on
mount and connect any
should be connected with their
Web