General Operating Instructions; Switching On/Off The Device - Medion GoPal E3212 Bedienungsanleitung

General Operating Instructions

Switching on/off the device

Your device will be in its normal operating state after the initial setting up. You can activate
and deactivate your device with the On-/Off switch.
1. To start your navigation system press briefly the On-/Off switch
Note
Your device is delivered in a status in which it will not switch off independ-
ently. You can adjust the period of operation to suit your needs using the
Settings button on the main screen of your device.
Your navigation system will use a low amount of electricity and the batter-
ies will be discharged, even when it is in the standby mode.
2. To switch off your navigation system press briefly the On-/Off switch
The following screen will appear:
You have three possible choices:
Button Description
Cancel/Back
Return to previous view with this key, if you have accidently called
up this screen.
Standby Mode
The device will go into Standby Mode if this key is clicked.
Reset
You can carry out a reset by clicking this key.
.
.
15