Electromagnetic Compatibility; Connection; Power Supply Through Car Adapter; Cabling - Medion GoPal E3212 Bedienungsanleitung

Electromagnetic Compatibility

•
When connecting additional or other components the "Electromagnetic Compati-
bility Directive" (EMC) must be adhered to. Please also note that only screened ca-
ble (maximum 10ft) should be used with this appliance.
•
For optimal performance, maintain a distance of at least 10 ft. from sources of high-
frequency and magnetic interference (televisions, loudspeaker systems, mobile
telephones etc. This will help avoid malfunctions and loss of data.
•
Electronic devices emit electromagnetic waves during operation.
These emissions are harmless, but can interfere with other devices operated in close
proximity.
While our devices are tested and optimized for electromagnetic compliance in our
laboratories, interference during operation may still occur in the device itself and
with other devices in its proximity.
Should such interference occur, try to eliminate it by adjusting the positions of and
the distances between the devices.
Before driving a car, please ensure that the electronic systems of the car are working
properly.

Connection

When connecting your appliance be sure to correctly observe the following instructions:

Power supply through Car Adapter

•
The car adapter should only be connected to the lighter socket of a car
(car battery = DC 12V
the power source in your car, contact your car manufacturer.

Cabling

•
Arrange cables so that no-one can tread on them or trip over them.
•
Do not place any items on the cable.
, truck battery = DC 24V !). If you are in any doubt about
3