Data Exchange Via Card Reader; Additional Card Material; Transfer Of Card Material To A Memory Card - Medion GoPal E3212 Bedienungsanleitung

Data Exchange via Card Reader

If you wish to copy large quantities of data (MP3 files, navigation maps) to the memory
card, these can also be stored directly to the memory card.
Many computers already have memory card devices. Insert the card into your computer
and copy the data directly to the card.
Because of the direct access you can achieve a much higher transfer rate compared to
using ActiveSync®.

Additional Card Material

Your navigation system is already equipped with digitalized map material in the internal
memory and/or memory card at the factory. Depending on the configuration, additional
maps may be included on your navigation DVD. You will be able to transfer these cards to
a memory card immediately. It is recommended that you use an external card reader (see
also page 51). The GoPal Assistant supplied with the device enables a simple and individ-
ual compilation of the map material to be transferred.
Depending on the amount of map data on the navigation DVD, memory cards with ca-
pacities of 256 MB, 512 MB, 1.024 MB or more may be required.
You can obtain additional memory cards (MMC or SD cards) in specialist stores.

Transfer of card material to a memory card

The transfer of additional card material to a memory card can take place through Explorer
on your PC via the following steps:
1.
Insert the DVD with the card material required.
2.
Start your workstation and select your DVD Drive.
3.
Copy the file with the .psf ending out of the Directory of the region that you re-
quire to the MapRegions Directory on your memory card, from the DVD.
You can transfer several files with map material to your memory card, depending on the
capacity of the memory card.
If you have copied digitized maps of several countries or country groups onto your mem-
ory card, you will be required to select the desired map in the navigation
application of your device.
51