Technical Data; Before Starting The Equipment - Matrix Rt 500-1 Originalbetriebsanleitung

Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.

Technical data

Mains voltage:
Power:
Cutting circle:
Revolutions n :
0
Cutting line diameter:
L Sound pressure level measured
pA
K uncertainty
pA
L Sound power level measured
WA
K uncertainty
WA
Sound power level guaranteed:
Vibration emission value
K uncertainty
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
The declared value of the vibrations was
measured by a standard test method that can
be used for comparison tool with another. It can
also be used as part of a preliminary assessment
of the degree of exposure.
WARNING! The value of the actual vibrations
emitted while using the device may be different
from the declared value depending on how
the tool is used. Estimate the exposure in the
real conditions in order to identify the security
measures taken with regard to personal
protective equipment (taking into account all
parts of the business cycle: times when the tool
is off, when he is asleep, he is on).
The level of loudness perceived by the user may
exceed 85 dB(A), necessitating the use of ear
muffs.
18
230-240 ~/50 Hz
550 W
29 cm
10500 rpm
1.4 mm
82 dB(A)
3 dB
95,61 dB(A)
3 dB
96 dB(A)
2
a = 4,121 m/s
h
2
1,5 m/s

Before starting the equipment

Assembling the grass trimmer
· Take the screw set out of the additional handle
(4).
· Fit the additional handle to the top handle (B2).
· Secure the additional handle with the screw
and star nut (5). (B3).
· Place the guard hood (12) onto the motor
housing as shown (B4) and secure with the
screw .
Attach the distance bracket (9) with the screw
(14) (B5).
Height adjustment (B6)
You can set your optimal working position by
adjusting the height.
· Undo the lock for the handlebar adjustment
(6).
· Pull out the bottom handlebar to the required
length.
· Refasten the lock for the handlebar adjustment.
Adjusting the additional handle (B7):
Place the grass trimmer on a firm surface. Undo
the lock of the additional handle (5) and move
the additional handle to its optimal position.
Lock the handle in place by retightening the
lock.
Adjusting the angle of the handlebar (B8)
When the lock is pressed you can
adjust the angle of the handlebar to 4 positions.
Set the angle as suited best for your work. Make
sure that there is an audible click when the
handlebar engages.
Adjusting the top handle (B9)
When the lock is pressed you can turn the top
handle to 2 positions, for example for cutting
edges of lawns. Make sure that there is an
audible click when the top handle engages.