Description Of Symbols; Specification - Silverline 262705 Bedienungsanleitung

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Toxic fumes or gases!
Caution!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice
Volts
V
Alternating current
~
Ampere
A
No load speed
n
o
Hertz
Hz
Watt, kilowatt
W, kW
(revolutions or reciprocation)
/min or min-1
per minute
4
Original Instructions

Specification

Voltage: .................................................................... 230-240V~ 50Hz
Power: ..................................................................... 1400W
No load speed: ......................................................... 5000min
Max depth of cut: ..................................................... 50mm
Max blade size: ........................................................ Ø210mm
Bore: ........................................................................ Ø25.4mm (1")
Supplied blade: ........................................................ Ø210 x Ø25.4 x
Mitre table angles: ................................................... 0° to 45°
Bevel cuts: ............................................................... 0° to 45° left
Straight cut:
0° x 0°: ................................................................... 120mm x 50mm
Mitre cut:
45° (L&R) x 0°: ........................................................ 80mm x 50mm
Bevel cut:
0° x 45° (L): ............................................................. 120mm x 30mm
Compound mitre cut:
45° (L) x 45° (R): ...................................................... 80mm x 30mm
45° (L) x 45° (L): ...................................................... 80mm x 30mm
Ingress protection: ................................................... IP20
Power cord length: ................................................... 2.0 m
Protection class: ......................................................
Weight: .................................................................... 6kg
Sound and vibration information:
Sound pressure L : ................................................. 89dB(A)
PA
Sound power L : .................................................... 102dB(A)
WA
Uncertainty K: .......................................................... 3dB
Weighted vibration a (main handle): ......................... 6.0m/s
h
Uncertainty K: .......................................................... 1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
As part of our ongoing product development, specifications of Silverline products may
alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using
the tool immediately and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
General Safety
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children must be supervised to ensure that they do not
play with the appliance.
Save all warnings and instructions for future reference.
-1
2.8mm x 24T
left & right
2
2