Technical Data - Ipro Inverter Smart Flow S Betriebsanleitung

• Install away from flammable materials
• Install in dry, well-ventilated places
• Install in places out of reach of electromagnetic interference
CAUTION
• Avoid places that are dusty or exposed to metal chips that may ingress the
controller

4. TECHNICAL DATA

Max. permissible current consumption by the pump
motor
Controller input voltage
Output voltage to the pump
Permissible range of controller input voltage
Input current frequency
Output current frequency range
Controlled device
Integrated pressure sensor
Permissible pressure range
Permissible flow
Ambient temperature range
Temperature of water pumped
Water pressure required for automatic start
Electrical system
Controller housing IP rating
TYPE
21
SMART FLOW S
(1-phase) 1.1 kW
8A
1~230V
1~230 V
(one phase)
1~ 200 V ÷ 240 V
50 Hz
30 ÷ 55 Hz
Pump
0.5~4.5 VDC
0,5 ÷ 10 bar
do 300 l/min
+5 ÷ +50°C
+5 ÷ +50°C
33% lower than the set pressure, but not lower
than 0.5 bar
Unconditionally effective grounding +
RCD In=30 mA
IP 55