Chauvin Arnoux C.A 6240 Bedienungsanleitung Seite 3

Go to our web site to download the user manual for your instrument:
Search on the name of your instrument. Once you have found it, go to its page. The user manual is on the right side. Download it.
read this user manual carefully,
■
comply with the precautions for use.
■
Store the measurement at an address identified by an object number (OBJ) and a test number (TEST). Two presses on MEM
MEM
are necessary:confirmation of the location (can be changed using the ▲ and ► keys), then storage (long press).
Automatic storage of measurements as they become available. Two long presses on MEM are necessary: confirmation of the
AUTO
location (can be changed using the ▲ and ► keys), then activation of automatic storage. Press START to start the measurements
and STOP to stop them.
Call up a stored measurement. The data in memory are viewed using the ▲ and ►. keys. Press the MR key to exit from read
MR
memory.
Choice of direction of the current. Each press reverses the current. If the measurement is available with both directions of the
±I
current, the device displays the average.
Selects the parameter to be modified (in wraparound mode, from left to right). In SET-UP mode, used to select a function, then
enter it with a long press.
During measurements or memory reads, a short press displays the measurement current, or the voltage on the terminals of
DISPLAY
the device measured, or the values R(+I) and R(-I).
A long press displays the battery life remaining in the range selected.
Increments the flashing parameter.
Erasure of a stored measurement. The data in memory are viewed using the ▲ and ► keys. A long press on the CLR key
CLR
confirms the erasure of the measurement. A short press on the CLR key is used to exit from erase memory.
MICROHMMETER C.A 6240
www.chauvin-arnoux.com
FUNCTIONS OF THE KEYS
692161C00 - Ed. 1 - 06/2024