Operation; Operation Instructions; Measures Before Starting Up; Working Area - Zipper Zi-Rpe60C Betriebsanleitung

11

OPERATION

11.1

Operation instructions

Do not operate the engine at maximum speed right from the start, as the engine
itself as well as the gearing components need a running-in time. The engine itself
reaches its maximum capacity after the first 10 hours of operation. Non-compliance
with this instruction reduces your engine lifespan substantially.
11.2

Measures before starting up

 Reading,
instructions.
 Unpacking all the parts. Controlling the plate compactor on
dust and other dirt.
 The machine is delivered remounted. Swing out the handle
and fix it with the related screws.
 Control the screws and fasten them when necessary before
you start up the machine.
 Controlling the belt tension.
 Controlling the oil level:
Oil level check at the engine:
If the oil level gauge shows no oil level if it is screwed in, please fill in oil SAE 15W40 till the edge of the
oil-filler neck. If you check the oil level the engine has to be levelled out horizontally.
Oil level check at the exciter: (ZI-RPE60C)
Before starting the exciter has to be checked on correct oil level.
The compactor has to be horizontally.
The oil level has to reach until the beginning of the oil-filler neck. Fill in the engine oil SAE 15W40
through the opening until the correct level is reached (use a funnel).
11.3

Working area

 The right humidity in the ground is very important for right tamping. Water is use as a
lubricant to help that the earth particles are pushed together.
Too less humidity causes not enough tamping.
Too much humidity causes gaps which are filled with water.
 The machine may not be used on hard, frozen or mixed earth that contains scraps of
bricks.
 Too high watering or excessive water contents can cause a stalling of the machine.
11.4 Operation

11.4.1 Starting

 Turn on the ignition by turning it onto the position ON.
 Set the petrol cock onto the position ON.
 Turn the Choke onto the position OPEN.
ZIPPER MASCHINEN GmbH
ZI-RPE60C – ZI-RPE90C25
understanding and
www.Zipper-Maschinen.at
N O T I C E
obeying the safety
OPERATION
25