Beko BCSA285K4SN Bedienungsanleitung Seite 171

Built-In Oven
Mounting the oven
B
After installation is complete, remove the protective film, tape, and other packing material, and take out the
provided accessories from inside the oven. To remove the oven from the cabinet, disconnect power to the oven
first, and then remove 2 screws on both sides of the oven.
Power connection
L
BROWN
or BLACK
BLUE or WHITE
A
N
YELLOW
and GREEN
Make sure to leave a gap (A) of at least 5 mm between
the oven and each side of the cabinet.
Secure at least 3 mm of gap (B) so that the door opens
and closes smoothly.
Fit the oven into the cabinet and fix the oven firmly on
both sides using 2 screws.
Rated current (A)
10 < A ≤ 16
16 < A ≤ 25
Minimum
cross-sectional area
2
1.5 mm
2
2.5 mm