DU.lT24NVE
• Do not stand in the movement
• Do not let children play with controls and near the gate.
• Should operating
faults occur, do not attempt to repair the fault but call a qualified technician.
Should a power failure or a break-down occur, the gate can be manually opened and closed as follows (refer
to figure):
1 Remove the protection
2 Insert the key "C" and turn it until rotation is no longer smooth.
3
Rotate
the
lever
"L"
Now the gate can be manually operated.
To reset the automatic
the special key "CE" and replace the cap "T". The normal operation
movement
of the gate.
• Every month check the good operation
• It is mandatory
not to carry out extraordinary
operations
must be carried out by qualified personnel
• The operator is maintenance
components
of the automation
dangers.
If the product
must be dismantled,
ferentiated waste disposal and the recycling of components (metals, plastics, electric cables, etc..). For this
operation
it is advisable to call your installer or a specialised
All Benincå products are covered by insurance policy for any possible damages to objects and persons
caused by construction faults under condition that the entire system be marked CE and only Benincå parts
be used.
Position
for the automatic
18
User's
area of the gate.
Manual and emergency
cap "T" of the gate lock which is pressure-inserted.
in either
direction
until
operation
of the gate, move the lever "L" back to the original position, turn and extract
of the emergency
free but it is necessary to check periodically
system work properly.
it must be disposed
operation.
handbook
Safety rules
operation
activation
of the
limit
Maintenance
manual release.
maintenance
or repairs as accidents
only.
Wear and tear of some components
Waste
disposal
according
company.
Warning
c
switch.
of the gate will be reset with the first
may be caused.
if the safety devices and the other
to regulations
in force regarding the dif-
Position for the manual operation
Tt-se
could cause