Service And Maintenance; Safety Instructions - Atlas Copco Rrc13 Sicherheitshinweise

Vorschau ausblenden Andere Handbücher für RRC13:

Produktanweisungen (168 Seiten)

100

Seite von 133

/ 133
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

RRC13

Personal protection equipment

Make sure the operators use:

• Eye protection, goggles or a visor.

• Ear protection.

• Gloves.

• Steel toe-capped shoes.

• Protective clothing, such as a leather apron.

• A helmet (for heavier applications).

• Do not use loosely hanging clothing, hair or jew-

ellery (risk of getting caught).

Working Area

• Ensure that the area in which you are working is kept free

from other people so that no one can get injured.

• People nearby must also wear hearing and eye protection.

• Check that there is good ventilation and dust extraction

from the premises.

• There should be a stand or a place available, on which the

machine can be safely placed.

• Work within a sealed-off area, if possible with protecting

walls.

• Explosive atmosphere must not be ignited - use acces-

sories of non-sparking material.

• Avoid chiseling into electric wiring hidden inside walls.

During work

• Disconnect the tool from the air supply before changing

accessories, chisel or die.

• Stop using the tool if abnormally loud noises or vibra-

tions occur during use.

• Be aware that the chisel may break during operation.

• Never trigger a hammer unless held against the work

piece.

• Use vibration dampened tools if available.

• Reduce the total time of exposure to vibrations, especially

if the chisel has to be guided by hand.

After the work is finished

• When finishing a job, disconnect the tool from its air sup-

ply.

• Make sure that the tool is switched off and has come to a

complete stop before it is put down.

• Put down the tool carefully, so that there is no risk of the

tool starting by itself.

• Remove the chisel, die or punch when the work is over.