Table of Contents
Introduction ....................................................................................15
Intended Use ..................................................................................16
Scope of delivery ............................................................................20
Connection..................................................................................21
Replacing a fuse ........................................................................23
Troubleshooting..............................................................................24
Disposal ..........................................................................................25
Technical data ................................................................................25
Intended Use
The connection and operation of consumers with an operating volt-
age of either 115 V or 230 V to the
intended sockets.
Depending on the input voltage, 115 VAC or 230 VAC, there are 115
VAC or 230 VAC available at the two outputs.
The power consumption of a connected consumer may not exceed
50 VA for type AT-50 or a maximum of 200 VA for type AT-200 If
this is exceeded or a short takes place, it can lead to overloading
and thus to destruction of the series transformer.
16