Changing the batteries
Should the batteries no longer work then you can
change them. Proceed as described in the section
'Replacing the batteries (figure A)'.
Switching the light on and off
(figure B)
There are various light settings selected by pressing the
on and off button (1b):
Press once: light on.
Press twice: light dimmed.
Press 3 times: light flashes.
Press 4 times: light off.
Expand the article (figure C)
1. Hold the article in one hand with the lamp pointing
upwards.
2. Use the other hand to turn the lamp cover (1c) in an
anti-clockwise direction in order to unfold the article.
Collapse the article
1. Hold the article in one hand with the lamp pointing
upwards.
2. Use the other hand to push the lamp cover (1c) onto
the article in a clockwise direction.
Note: Make sure that the lamp cover is placed straight
on the article.
Possible uses
The article can be used in three different ways:
• As a torch (figure D)
• As a standing lamp (figure E)
• As a hanging lamp (figure F)
To use the hanging lamp, fold the suspension device
with carabiner function (1d) up out of the item (Fig. F).
GB
11