Herunterladen Inhalt Inhalt Diese Seite drucken

Kemar KMC-218 Gebrauchsanleitung Seite 32

Premium multifunktionskocher mit rühreinsatz
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
e. Plug the power cord in to the POWER SOCKET, then the Stir Cooker into a wall
socket and switch on.
f. The Stir Cooker will „Beep" once and the „Keep Warm / Cancel" LED will flash slowly.
g. Press the „Risotto" button on the USER CONTROL PANEL.
h. The Risotto LED Indicator will illuminate.
i. After 8 seconds the cooking process will begin and the STIRRER will begin to
rotate. Allow the Cooker to preheat for 2-3 minutes.
j. Add the amount of rice you require (refer to the guidelines for brown rice when
using Risotto (Arborio) type rice). Do not add water / stock at this stage.
NOTE: If your recipe requires onions or garlic then add them at this stage to allow
them to brown with the rice.
k. Observe the rice and when it has started to brown add water / stock according
to your recipe.
l. The Stir Cooker will continue cooking your Risotto for around another 30 minutes.
At approximately 20 minutes the stir function will stop, the buzzer will sound and
after 10 minutes the Stir Cooker will switch to „Keep Warm" mode.
m. If you wish you can now add additional cooked ingredients to your Risotto,
carefully stirring them in and allowing them to warm through.
n. Your Risotto should be ready to serve.
v. When have served the food turn off and unplug the Cooker allowing it to cool
before cleaning. IMPORTANT. Use Plastic or Wooden utensils to avoid damage to
the non stick surfaces.
Sauté
a. Place the INNER POT (3) into the BASE UNIT (6). Rotate it both left and right to
ensure it is correctly located. It should come to a stop in both directions when it is
seated properly.
b. Taking the STIRRER locate it on to the spigot in the centre of the INNER POT.
Make sure that it is correctly located by twisting it both ways, it should stop at
both directions if located properly.
c. Add a little cooking oil or similar.
d. Place the LID on the Stir Cooker
e. Plug the power cord in to the POWER SOCKET, then the Stir Cooker into a wall
socket and switch on.
f. The Stir Cooker will „Beep" once and the „Keep Warm / Cancel" LED will flash slowly
32

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis