temperature setting will be shown on the display. During the heating time, the display will
show the temperature of the plates until the desired temperature is reached.
Temperature settings
-
Temperature settings: 160 ºC, 170 ºC, 180 ºC, 190 ºC, 200 ºC, 210 ºC, 220 ºC, 230 ºC.
Press the temperature-setting button repeatedly to switch between the available settings.
-
When it reaches 230 °C, if you press the button again, it will go to 160 °C again.
Tip
Always select the lowest temperature setting (160 ºC) when using the appliance for the first
time.
Vibration setting
When you switch on the appliance, it will remember the last vibration setting.
-
-
When the vibration is on, the vibration indicator light will be shown on the display.
-
If you want to use the hair straightener without vibration, press the vibration on/off button.
You can reactivate it at any time by pressing the button again.
-
The appliance will only vibrate when the plates are closed.
-
When you open the plates, vibration will stop.
Auto switch-off
The appliance turns automatically off after 30 minutes of inactivity.
Using the hair straightener
1. Wash and dry hair thoroughly.
2. Separate your hair into approx. 4 cm strands.
3. Hold the appliance with one hand.
4. Begin at the roots and lay the prepared strands one at a time between the hair-straightener
plates.
5. Close the hair straightener and glide it slowly from root to tip. Repeat until your hair is
straightened as desired.
6. Once finished styling, let your hair cool down and then comb it through.
7. Once finished, press, and hold the power button to switch off the appliance.
8. Slide the plates lock switch down to lock the plates before storing the hair straightener.
4. CLEANING AND MAINTENANCE
-
Unplug the appliance from the power supply and allow it to cool down before cleaning.
Do not immerse the appliance in water or other liquids.
-
-
Place the appliance on a heatproof surface until it cools down before cleaning or storing it.
ENGLISH
RITUALCARE TWERK
35