Setolite SETO LED SNAKE EASY Gebrauchsanleitung Seite 8

With regard to warranty and guarantee regulations, the terms and conditions valid at the time of purchase apply.
Please refer to our latest sites at www.setolite.com
This quality product has been manufactured according to current technical standards, tested and delivered in a safe condition.
In order to maintain this condition and to ensure safe operation, the user must observe the notes and warnings in these
instructions for use.
It is to assume that a safe operation is not possible
• if the rope light shows visible damage.
• if the rope light is no longer working properly.
• after prolonged storage under unfavourable conditions.
• after heavy transport stresses.
In these cases, the rope light must be sent in for repair.
ATTENTION!
• Do not operate the SETO LED SNAKE EASY while it is wound up.
• To prevent overheating, avoid contact between flexible rope lights and parts of rope lights.
• Do not fold or bend the SETO LED SNAKE EASY.
• Do not bend the SETO LED SNAKE EASY to a diameter of less
than 12 mm.
• The rope light can only be bent vertically, not horizontally.
• Operation outside the permissible tolerances of ± 10 percent can
cause damage to the rope light.
• Do not cover the product as the cover may cause the rope light to
overheat, melt or catch fire.
• Do not pierce, cut or shorten the SETO LED SNAKE EASY.
• Do not run the cable or the rope light through walls, doors, windows or similar parts of the building structure.
• Do not immerse the rope light in liquids and do not use the product near standing water or other liquids.
• Do not install in cabinets, tanks or enclosures of any kind.
• Do not subject the SETO LED SNAKE EASY to constant bending.
• Do not secure this product or its cable with staples, nails or similar means that will damage the insulation.
INFORMATION!
Repairs to the rope light must be carried out only by the manufacturer, his customer service department or a qualified
electrician. A qualified electrician has the professional training, knowledge and experience, as well as knowledge of
the pertinent standards, to assess the assigned work and recognize possible hazards. Warranty repairs are carried out
by the manufacturer only.
8
Warranty
Safety information
Do not operate when wound up!