Inhaltszusammenfassung für Setolite SETO LED SNAKE EASY
Seite 1
Professional Lighting Solutions GEBRAUCHSANLEITUNG INSTRUCTIONS FOR USE SETO LED SNAKE EASY SETOLITE Lichttechnik GmbH Bockhackerstr. 13 - 42499 Hückeswagen, Germany +49 2192 93624-0 - +49 2192 93624-25 info@setolite.de - www.setolite.com...
Seite 2
Technische Daten ErP-Daten (2019/2020-EU) Gültigkeit der Gebrauchsanleitung Diese Gebrauchsanleitung ist gültig für Lichtbänder der Serie SETO LED SNAKE EASY. Typenbezeichnung und Artikelnummer entnehmen Sie bitte dem Typenschild auf dem Lichtband. WICHTIG VOR GEBRAUCH SORGFÄLTIG LESEN UND AUFBEWAHREN FÜR SPÄTERES NACHSCHLAGEN •...
Seite 3
In diesen Fällen ist das Lichtband zur Reparatur zu geben. VORSICHT! • Betreiben Sie die SETO LED SNAKE EASY nicht, während sie aufgewickelt ist. • Um eine Überhitzung zu verhindern, vermeiden Sie den Kontakt zwischen flexiblen Lichtbändern und Teilen von Lichtbändern.
Seite 4
Inbetriebnahme Die SETO LED SNAKE EASY wird prinzipiell anschlussfertig mit Zuleitung und Stecker ausgeliefert. Das Lichtband ist nur an Wechselstrom – mit Spannung gemäß Typenschild – an eine vorschriftsmäßig installierte Schutzkontaktsteckdose anzu- schließen. Bitte beachten Sie, dass Ihre Anlage den einschlägigen VDE-Richtlinien entspricht.
Seite 5
Verwenden Sie zum Entfernen von Schmutz, Staub, Öl und Fett usw. ein weiches, trockenes und fusselfreies Tuch. Wartung Das Lichtband SETO LED SNAKE EASY wurde als wartungsfrei konzipiert. Es sind daher keine Wartungsarbeiten not- wendig. Das Produkt ist reparaturfähig. Einzelne Komponenten können im Bedarfsfall durch eine Fachkraft ausgetauscht bzw.
Seite 6
ErP-Daten (2019/2020-EU) Produkt / Modell Leuchtmittel / Betriebsgerät EPREL • SETO LED SNAKE EASY Diese Lichtbänder enthalten Lichtquellen (LED) der Energie- effizienzklasse F. SETOLITE Lichttechnik GmbH Die Lichtquellen (LED) dieses 1410911560-M Lichtbandes sind nicht aus- tauschbar. Das Betriebsgerät dieses Licht-...
Seite 7
Technical data ErP data (2019/2020-EU) Validity of instructions for use These instructions for use are valid for rope lights of the series SETO LED SNAKE EASY. Please refer to the rating plate for the type designation and article numbe IMPORTANT READ CAREFULLY BEFORE USE AND KEEP FOR LATER REFERENCE •...
Seite 8
In these cases, the rope light must be sent in for repair. ATTENTION! • Do not operate the SETO LED SNAKE EASY while it is wound up. • To prevent overheating, avoid contact between flexible rope lights and parts of rope lights.
Seite 9
Initial operation In principle, the SETO LED SNAKE EASY is delivered ready for connection with a supply cable and plug. The rope light is only to be connected to an alternating current – with the voltage according to the rating plate – to a properly installed safety socket.
Seite 10
To remove dirt, dust, oil and grease, etc., use a soft, dry, lint-free cloth. Maintenance The rope light SETO LED SNAKE EASY was designed to be maintenance-free. Therefore no maintenance work is necessary. The product is repairable. If necessary, individual components can be replaced or repaired by a specialist.
Seite 11
ErP data (2019/2020-EU) Product / model Luminant / control gear EPREL • SETO LED SNAKE EASY This rope light contains light sources (LED) of energy efficiency class F. The light sources (LED) SETOLITE Lichttechnik GmbH 1410911560-M of this rope light are not interchangeable.