Herunterladen Diese Seite drucken

miniland digitalk easy Bedienungsanleitung Seite 19

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
Problem
The On/Off and charge LED
indicator of either unit (4 or 11) does
not light up when connected to the
power mains.
The batteries won´t recharge.
6. MAINTENANCE
Clean the baby monitor with a soft, dry rag. Do not use cleaning products or solvents.
7. TECHNICAL SPECIFICATIONS
- Frequency: 2.4 GHz
- Range: up to 300 m in ideal conditions in an open space. A range of up to 50 m can be obtained
indoors (due to obstacles such as walls, doors, etc.).
- Baby unit (transmitter):
- Parent unit (receiver):
· Batteries: 2 x AAA 1.2V 800 mAh Ni-MH (included)
- Transmission power:
· Average: 10 mW
· Maximum: 80 mW
- Maximum operating time with fully charged batteries (alternating listening / standby periods): 6 to 7 hours
- Maximum operating time with fully charged batteries (when the baby´s room is silent for most
of the time): 10 to 12 hours.
- Operating temperature range: 0° C to 50° C
- Operating relative humidity range: 20% to 75%
8. INFORMATION ON THE DISPOSAL OF THE BATTERIES AND THE PRODUCT
· Remember to remove the batteries and dispose of them in a responsible
manner when disposing of the baby monitor.
· You should not mix products bearing the crossed-out rubbish bin symbol with your
domestic rubbish. These products should be taken to the collection points allocated
by the local authorities for appropriate treatment. Alternatively you may contact the
point of sale where you purchased the product.
Hereby, Miniland S.A. declares that this "89474 digitalk easy" is in compliance with
the essential requirements and other relevant provisions of Directive 2014/53/EU.
Possible cause things to do / check
· Check for problems with the power network.
· Check your power adapter and the USB cable are both correctly
connected to the mains electricity supply and the device socket.
· Check the unit has been connected by pressing the on / off button
(1 or 10).
· Check your power adapter and the USB cable are both
correctly connected to the mains electricity supply and the
device socket.
· You are using non-rechargeable batteries. Remember you
should only use the batteries supplied or other rechargeable
batteries of the same characteristics (2 x AAA 1.2V 800 mAh
Ni-MH). Please check the type of batteries you are using.
19
ENGLISH

Werbung

loading

Diese Anleitung auch für:

89474