Werbung
SKIN ALLERGY TEST
TO CONDUCT A SKIN ALLERGY TEST,
FOLLOW THESE STEPS:
1.
Apply a proper amount of conductive gel on the inner
side of your elbow, as shown in Figure 1.
2.
If you do not have a conductor gel such as the Project
E Beauty Aqua Collagen Gel, use any gel or serum
based product.
3.
Power on the device and select a mode with a proper
intensity level.
4.
Massage the area for 2-3 minutes using the device.
5.
Power off the device and allow the area to air dry.
6.
If there is no reaction within 48 hours, you can safely
use the device as directed.
Werbung
