GOAL ZERO YETI 400 Bedienungsanleitung Seite 4

Charging Your YETI
CHARGE ME NOW: Before using or storing, plug your YETI into the wa
until it is fully charged f at any point you hear a beeping from your YETI,
plug it into a power source, like an AC outlet or a solar panel, as soon as
possible This built in warning indicator is to help prevent battery damage
when the charge gets ovv. For more tips and tricks on keeping your battery
healthy, see the BATTERY 101 section
NO INPUT
LCD Battery Display: The LCD Battery
of your YETI There are 5 segments
40% - 60% 80% -100% capacity.
disappear from the display, indicating the remaining charge When charging
your YETI you will notice a battery
This indicates the current charge status.
al battery segments will be lit and remain solid
2X NOMAD 20
Solar Panel
Charging from Solar
The YET Is charging port is located on the top-left
and has a blue ring around it. This 8mm port is designed
Zero solar panels and is capable of taking in 120W of solar
I. Place your solar panel where it will get as much direct sunlight as
possible See the graphic in the SOLAR 101 section for help
2. Insert the blue-ringed plug form the panel into the INPUT port on the
front of the YETI You wil know the YETI is charging
ight next to the INPUT port lights up, and the battery segments in the
LCD BATTERY DISPLAY are blinking The YETI is fully charged when a
battery segments stop blinking and remain solid
3 Some GOAL ZERO panels are chainable
your YETI and reduce solar charge times
taking in 120W of solar
When connecting older versions of the NOMAD and BOULDER Solar Panels,
use the Legacy Nomad Adapter Cable or the 8 Omm to 8. Omm Adapter Cable
to connect to the YETI
4
OUTPUT
Display indicates the charge
to the battery, approximating 20%
As you use your YETI, segments
segment bFnking at a 1 second interva
Once your YETI is ful y charged,
GOAL ZEROYETI 400 LAPTOP
SolarGenerator
20 Hours 3-5 Recharges
corner of the faceplate
to work with Goa
when the blue LED
to provide more power to
The NPUT port is capable of
Charging from the Wall
Using the included ACWaI Charger,plug your YETI into anywa Iout et Youwi
know the Yeti is charging when the blue LED light next to the NPUTport turns
on, and battery segments in the BATTERY DISPLAY are blinking The YETI •s fully
charged when all battery segments stop blinking and remain so id The YETI shou d
eve
recharge from the wall in about 5 hours
will
Charging from your Car
To charge your YETI from a car or 12V source, you wil need to purchase
an 8.0 mm to 12V charger
Solutions Center at 1-888
GOALZERO YETI 400 LAPTOP
Salar Generator
5 Hours 3-5Recharges
I The AC wall charger
Connect the two pieces by plugging
cable into the box
from GOALZERO com. Call our Customer
794-6250 for help identifying
comes in two pieces
the
the charger
5