Werbung
HOW TO USE
Follow these steps for proper operation during a treatment:
1.
Attach the temples
on each side of the
LightAura Plus mask to
ensure a comfortable fit
on the face. Adjust the
elastic strap on each
side of the neck for a
comfortable fit. Avoid
wearing the mask too
tightly against the face.
2.
Insert the USB cord into
the control box. If the
USB plug does not fit,
carefully try inserting it in
the opposite direction.
3.
Plug the USB wire into
the upper side of the
control box. Ensure
the control box is fully
charged before use. If
the USB plug does not fit,
carefully try inserting it in
the opposite direction.
Werbung
