Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REMOTE CHANNEL AUTO-SCROLLING
This device is equipped with an Auto-scroll
function. While the Auto scroll function
IS set, the
main unit will automatically cycle to display the
indoor temperature andthe temperature of each
remote sensor for 4 seconds.
1. To manually retrieve the specific sensor
temperature reading, press [CHI key until
desired channel number is displayed
2. To enable Auto scroll function, use [CHI button
to select channel 1,2, until auto scroll
icon appears beside the channel indicator
DCF.n
RADIO CONTROLLED CLOCK
The radio-controlled time is calculated bythe
CesiumAtomic clock of Braunschweig (official
clock of Germany) Then the time is coded and
transmitted from Mainflingen
near Frankfurt
via a signalon DCF-77 ( 77.5 kHz). T hetransmitting
range of the signal is 1500km, which meansthat
most of Western and Central Europe is covered
bythis signal. Within this range the received time
is completely accurate. Once sensor signal(s) are
received, the wave icon will flash to indicate that
the receiving unit starts to receive the DCFradio
controlled time signal. RadioControlled wave
icon indicates 4 levels Ofsignal Status:
weak
medium
strong
very
weak
As soon as the time signal is received, the wave
icon wil stay on the LCD, andtime and calendar
will automatically be updated.
Note: During the 10-minutetime signal reception,
all manual key inputwil be ignored. In addition,
the continuous mood light or Alert light will be
turn off temporary until reception is over. You can
also press and hold [A I key for 2 seconds to
manually activate the reception in normal mode
12
SETTHECLOCK, C ALENDAR& TEMPERATURE
UNIT
Press & hold [MODE) button for 2 seconds
to enter clock setting mode. Flashing24Hr wi
appear.
2 Press [A I or
button to switch between
24Hr and 12Hrformat, and then press [MODE]
button to confirm
3 Thehourdigitswill flash UsetheIA] button
to increase by one hour or [VI
button to
decease by one hourto your desired hours
Holding down either button will change the
increment unit rapidly press [MODE]buttonto
confirm
4 The minute digits will flash Use the [A1
I button to set your desired minutes
Holding down either button will change the
increment u nitrapidly.Press[MODE] b utton
to confirm
Note: Every change of minute digit will
automatically reset the seconds to zero
5 The year digits will flash. IJsethe I
I Y] buttonto setyourdesired years.Holding
down either button will change the increment
unit rapidly Press [MODE] button to confirm
Note: Year range is from 2000to 2099
6 The DATE-MONTH/MONTH-DATE digitswi
flash Use the I
button to choose
DATE-MONTHor MONTH-DATE,press
[MODE] button to confirm. Then use the A]
or
I buttonto setyour desired months and
days. Holding down either button will change
the increment u nitrapidly.Press[MODE]
button to confirm
7 The 'C/ OF digits will flash. Press
button to switchbetweenoc(Centigrade) and
OF(Fahrenheit) temperature format, and then
press[MODE] button to confirm.
Note: If no key press during setting mode for
10seconds, it will automatically keep the
setting and exit to normal display
SET THE DAILY ALARM
_ In Alarm time display mode, press & hold [MODE] button for 2 seconds, the hour digits will flash
I or[
I buttonto setyourdeslredalarmhours, t henthe minutedigitswill flash Use
Use the
the [A
I or [
buttonto setyour desired alarmminutesHolding down eitherbuttonwill change
the increment u nitrapidly.Press[MODE) b uttonto confirm
In alarmtimedisplaymode,pressI
I buttononceto togglebetweenenableordisable the
daily alarm.
Whenalarmis beeping, p ressanybuttonWII stopit exceptthe (SNOOZE-LIGHT)
Press the [SNOOZE-LIGHT] b utton will stop alarm sound temporary for 5 minutes.
HOW TO READ INDOOR/OUTDOOR TEMPERATURE
When it displays the indoor temperature (not Auto-scrolling), press [CHI button once to switch to
channel 1 and display the channel 1temperature, press [CHIbutton againwill switch to next
channel The sequences are:
Indoor Channel 1
Channel2
_ In Auto scroll mode,the upper LCDwill alternately display indoor temperature and the registered
remote temperatures for 4seconds
Note:Onlyregistered remotechannel(s) w ill be shownupin theAuto scrollmodeand
unregistered channel(s) wil be skipped.The "
a RFloss link in a specific sensor channel
Whenreceivedindoortemperature is over+60oc(+1400 OF) o routdoor t emperature is over+70oc
(+158.0 O F), "HHH" will appearon the upperLCD. W henreceivedindoortemperature is below
-10oc(+14.0 OF) o routdoortemperature is below-50oc(-580OF), "LLL"will appearonthe upper
LCD
HOW TOSETALERTLIGHTON INDOOR/CHANNEL 1
Press& hold[ALERT] buttonfor2 seconds to enterAlertLightsettingmode.Press[A ] or [V]
button to select Alert Light monitor according to Indoor temperature or Channel 1temperature Press
[ALERT]to confirm
Note: The channel 1Alert light is available Only if the channel 1 has been registered successfully
1. While the Alert lighting color is setto monitor indoor temperature, the color of Alert light and LCD
backlight will change according to temperature as in Table 1
Table 1:
Over250 'C
ndoortemperature
(77OOF)
MoodLight c olor
red
LCD backlight color
red
button.
Channel3
Auto Scrolling (repeat)
oc" or" ._OF"
displaytoprompt t he userfor
2000C-24goc
Below1490C
(68
(E7b0F)
purple
blue
purple
blue
13
Werbung
