Activating The Test Mode On The Handset - Aastra Messkoffer Bedienungsanleitung

Measurement/Planning
Answer the call by pressing the handset key
To end the call, press the handset key

Activating the test mode on the handset

The handset is now in the idle state.
The display indicates the user (here: DeTeWe)
and the handset's internal call number (here: 1)
Both the user name and the internal call number
can be changed.
To activate the test mode, press
In the display also indicates the following, in addi-
Site Survey Mode
tion to the user and the internal call number (see above):
- : worldwide unique code of the base station with which the
RFPI
handset is currently connected.
- : Errors occurred on the handset (PP) or
FE PP/FP
the base station (FP)
- : Current field strength of the receive signal (RSSI)
-dBm
- : Indication of up to four base stations of a system with suffi-
RPN
cient field strength
During project planning only one base station is displayed.
A
.
A
a second time.
C
briefly.
RFPI ............
FE PP: ... FP: ...
-dBm ......
RPN ......
Hold Option
DeTeWe
1
Menu
RFPI ............
DeTeWe
1
FE PP: ... FP: ...
-dBm ......
RPN ......
Menu
51