Troubleshooting - Indesit UFAN 300 Gebrauchsanleitung

Troubleshooting

If the appliance does not work, before calling for Assistance ( see Assistance ), check for a solution from the following list.
Malfunctions:
The green POWER indicator light does
not illuminate.
The WARNING Indicator light is Always
On
The motor runs continuously.
The appliance makes a lot of noise.
Possible causes / Solutions:
• The plug has not been inserted into the electrical socket, or not far enough
to make contact, or there is no power in the house.
• The door is not closed properly or has been open continuously.
• The door has been opened too frequently.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position.
• The TEMPERATURE ADJUSTMENT knob is in the "Fast Freeze" position:
the yellow FAST FREEZE indicator light is on ( see Description ).
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The thickness of the frost exceeds 2-3 mm ( see Maintenance ).
• The appliance has not been installed on a level surface ( see Installation ) .
• The appliance has been installed between cabinets that vibrate and make
noise.
• The internal refrigerant makes a slight noise even when the compressor is
off. This is not a defect, it is normal.
GB
15