Connection - Jeti Model Duplex Rcsw Bedienungsanleitung

Switching is indicated by a red LED that is visible through the
opening on thesideof theRCSwitch.
Setting the polarity of the switch is specific for each JETI model
product, in the chart below there is a list of several supported
devicesand their RCSwitchsettingsfor DCand DStransmitters.
Central Box 200
Central Box 400
Main Switch

2 Connection

In normal mode the Ext slot is not used for output. It is used for
pairing, for software updates and for connecting the JETIBOX
terminal. However it is possible to supply power to both the RC
Switch and the RC Power Switch through the Ext. or Control
Output slots.
● RCSwitch
Switchedoutput isasignalline.
COM PLEX RADIO CONTROL SYSTEM
DEVICE
DPS 40
SPS 20
DSM 10
Inverted polarityof theswitch
✘
✘
✘
✘
✘
✘
15
EN