Pairing; Input Voltage - Jeti Model Duplex Rcsw Bedienungsanleitung

1.1 Pairing

Pairing is done similarly to the pairing of receivers using the Bind
Plug.
Procedure for pairing:
1. Connect the Bind Plug to the EXT output.
2. Connect the power supply to the Control Output.
3. Select "pairing" in the RCSwitch menu in the JETI transmitter.
4. Select a control for the RCSwitch in the transmitter, select the
polarity of the switch, then also assign the audio sequence.

Input voltage

COM PLEX RADIO CONTROL SYSTEM
Bind Plug
Fig. 2:Setting the RCSwitch in the JETI transmitter
14
EN
Fig. 1:Pairing