Assembly Instructions - Fluid Tunturi Rw30 Bedienungsanleitung

Assembly Instructions

..........................................................................................................................................................
STEP 1
REQUIRED
Side Rail Left / Right [2]
Front Leg Assembly [5]
Rear Leg Assembly [6]
8x M8 Nyloc Nut [12]
16x M8 Washer [14]
8x M8x20mm Bolts [18]
STEP 2
REQUIRED
Main Frame [1]
Side Rail [2]
NOTE
Requires two people.
Installing the Legs to Side Rails
Install the Front Leg Assembly[5] (Front Leg with Transport Wheel
attached) and Rear Leg Assembly[6] onto the Side Rail[2] as shown. You
will need 8x M8x20mm Bolt[18], 16x M8 Washer[14] and 8x M8 Nyloc
Nut[12].
Mounting Main Frame to Side Rails
Mounting Main Frame[1] to Side Rails [2] as shown.
Note: Do not secure Main Frame till Step 4 below
M8x20mm Bolt
M8 Washer
M8 Nyloc Nut
7
M8 Washer