Philips GC 8280 Bedienungsanleitung Seite 18

EnGlish
18
Problem
Wet spots appear
on the fabric during
ironing.
Action
Switching on the appliance
Using the menu button (see
section 'Display menu')
The iron switches off after the
iron-off time has elapsed (see
section 'Iron-off function')
Pressing the + and - buttons
(see section 'Setting the
temperature')
Cause
The wet spots that appear on the fabric
after you have steam ironed for some
time may be caused by steam that has
condensed onto the ironing board. Iron
the wet spots without steam for some
time to dry them. If the underside of the
ironing board is wet, wipe it with a piece
of dry cloth.
iron display guide (Fig. 2)
- Temperature settings suitable for specific fabric types.
Option
Switching the steam lock
on or off
Setting the iron-off time
Switching the sound on
or off
Choosing a language
Setting the water hardness
Choosing the fabric type
The iron heats up because
you have selected a
different fabric type
The iron cools down
because you have selected
a different fabric type
The iron has reached the
correct temperature for
selected fabric type
Solution
To prevent steam from condensing
onto the ironing board, use an
ironing board with a wire mesh top.
Message in English
WELCOME TO PHILIPS - CHECKING
SENSORS - CHECKING WATER -
WARMING UP
STEAM LOCK - ON - OFF -
CONFIRMED
IRON OFF - 5 MIN - 10 MIN - 20 MIN
- 30 MIN - CONFIRMED
SOUND - ON - OFF - CONFIRMED
LANGUAGE - ENGLISH - DUTCH
- FRENCH - GERMAN - PORTUGUESE
- SPANISH - ITALIAN - CONFIRMED
WATER HARDNESS - SOFT - MEDIUM
- HARD - CONFIRMED
IRON OFF - STANDBY - PRESS ANY
KEY TO RESUME
ACETATE - ACRYLIC - VELVET - NYLON
- SILK - VISCOSE - POLYESTER - WOOL
- RAYON - COTTON - JEANS - LINEN
WARMING UP
COOLING
TEMP OK