Ironing Without Steam - Philips GC 8280 Bedienungsanleitung

 Set the required steam setting with the + and - buttons on the steam
generator control panel.
p for maximum steam (temperature setting MAX).
[ for moderate steam (temperature settings 3 to MAX).
] for minimum steam (temperature settings 2 to MAX).
a for no steam (temperature settings 1 to MAX).
The steam light flashes to indicate that the steam generator is
,
heating up.
After approx.  minutes, the steam light stays on continuously to
,
indicate that the steam generator is ready for steam ironing.
Note: During ironing, you can adjust the steam setting with the + and - steam
buttons. It takes a few moments before the amount of steam is adjusted.
5 Press the steam trigger to start steam ironing.
When you put down the iron during ironing, put it on its heel or on the
iron stand.
The opening and closing of the steam valve in the steam generator
,
causes a clicking sound. This is normal.
steam lock function
The steam lock allows you to steam iron non-stop without having to press
the steam trigger continuously.
- When the steam lock function is set to 'on' (the default setting in the
display menu), the iron produces steam continuously when you press
the steam trigger once. To stop steaming, press the steam trigger once
again.
- When the steam lock function is set to 'off ' (see section 'Display
menu'), the iron only produces steam when you press the steam trigger.
Note: Release the steam lock when you put the iron on its heel or on the iron
stand. This prevents that hot steam escapes from the iron or that the iron
stand gets wet.
vertical steaming
Never direct the steam at people.
1 Hold the iron in vertical position and press the steam trigger to
steam iron hanging curtains and clothes (jackets, suits, coats).

ironing without steam

There are two ways to iron without steam:
- Simpy start ironing without pressing the steam trigger.
- Select steam setting a (no steam) and start ironing.
EnGlish
11