Program Chart; 4.2 Programming - GM-Racing Purple SX7 Gebrauchsanleitung

Start Current START AMP
After 5s of throttle neutral position, the Start current is activ.
The Start current should be ajusted for max. Start speed. (Low wheel spin).
(Factory setting 200A)
POWERCURVE
The Purple SX9 has 3 different power curves for different driving style and tracks.
0 = linear
1 = soft (exponential -)
2 = hard (exponential +) for stock racing
3-9 = hard
4.2 Program Procedure
- Speedo off - turn on transmitter
- Press SET button and hold it and switch on
the speedo until the red LED turns on and the
green LED is on for 3 short times
- (Turn on speedo,then release button during
you see the described LED signs)
You have now reached the programming mode.
Should you not adjust anything within the next
4sec, the esc go to the IDA-programming
system.
- Press SET button so often until you have
reached your desired program no. (
shows each increase of the value
- The speedo confirms that you have entered
program mode with 3 short green LED signals
after another 3 short green LED signals and the
red LED on , you may begin entering the value
- Now press the SET button as often as function
is requested ( see table) (the
each increase of the value
- The ESC confirms again with
LED signals and returns to driving mode
4.2.1 #0 IDA-System: Programming with
GMVIS-Commander
The IDA-System makes it possible to read and
write all adjustments with the GMVIS-
Commander to the speed controller.
Adjust the GMVIS-Commander to the MENU
PROGRAM (with button right).
You can choose the 8 Undermenu with the up
and down buttons.
Push the MODE-button and the up/down/right
buttons to adjust the values.
After adjusting the value push the START/STOP
button to save the value and to start the Data
transmision.
If you push the START/STOP button again, the
Data transmision will start again.
!
.
the red LED
)
,
red LED shows
)
3 short green

Program Chart

PROG VALUE
0-1-2-3-4-5-6-7-8-9-10
#0
IDA-
IDA-System (RS 232) Intelligent Data-System
System
#1
Current
limit
50A
60A
AMP LIMIT
#2
BrkMax
0 10
#3
AutoBrk
0 10
#4
0 1
hard
linear soft
POWERCURVE
exp.- exp.+
Werner Vonk
with GM Purple Sx9
in South Africa
70A
80A 90A 120A 130A
100A 110A
20 30 40 50 60 70 80
20 30 40 50 60 70 80
3=2 4=2 5=2 6=2 7=2 8=2
2
hard hard hard hard hard hard
exp.+ exp.+ exp.+ exp.+ exp.+ exp.+
140A
150A
90 100
90 100
9=2 10=2
hard hard
exp.+ exp.+
17