4.2 Knobs for the cooking zones
WARNING!
Refer to Safety chapters in the hob user
manual.
You can operate the hob with the knobs for
the cooking zones.
4.3 Heat settings
Knob indication
0
1 - 9
Turn the knob to set a heat setting.
4.4 Automatic heat-up (if applicable)
The automatic heat-up function heats the
cooking zone with full power for some time.
1. Turn the knob for the cooking zone
clockwise as far as possible (beyond the
highest heat setting).
2. Immediately set the necessary heat
setting.
3. To deactivate the function, turn the knob
to the off position.
4.5 Using the double zone (if
applicable)
In case the hob has its own user
interface with sensor fields the function is
controlled by the hob. Refer to Daily Use
chapters in the hob user manual.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Setting the time
After the first connection to the mains, wait
until the display shows "00:00".
8
ENGLISH
Function
Off position
Keep warm setting
Heat settings
1. To activate the double zone, turn the
knob clockwise 9. Do not turn it through
the stop position.
2. Turn the knob slowly until you can hear a
click. The two cooking zones are on.
3. To set the necessary heat setting refer to
"Heat settings".
4.6 Sensor fields / Buttons
To set the time.
To set a clock function.
To set the time.
4.7 Display
A
B
C
A. Clock functions
B. Timer
C. Heat-up indicator
1.
,
- press to set the time.
2.
- press to confirm it or the set time of
day will be saved automatically after 5
seconds.
A