Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Press on the Sene tab at
the bottom of the Home
screen
6. Choose the
function, set the
value for the
function, and then
press the back
button in the top
right corner, to return
to the previous
screen.
2. Press on the Automation
tab at the top of the screen.
4. Setup is very similar to the
scene setup on the previous
page, and includes an extra
section for specifying a
trigger for the scene to start.
Press the Pen next to
"Please Enter Scene Name"
to input the name for your
Scene.
Press the Red Plus next to
"When any condition is
satisfied" to add the trigger
Press the Red Plus next to
"Execute following actions"
to add the action required.
Then select the heater from
the list of devices.
32/ 52
3. Press on the + at the top
of the screen or press on
Add Automatic Action
5. Select the condition when
the automation should start.
A number of triggers can be
combined.
7. Once all the functions required have
been added, press the Save button in
the right corner to finalize and save your
new scene.
The automation is now set up, it can be
turned on and off using the toggle on the
home page.
Werbung
