Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTING USING APP MODE ALTERNATIVE METHOD
Before initiating the connection, make sure the unit is in standby mode(Power switch ON,
but unit turned off), with the WiFi Light Indicator flashing once per second. Also ensure
your phone is connected to the WiFi network. (We advise turning mobile data off during
setup).
1. Open app and press "+" to
add device, or use the add
device button.
4. Ensure the Ambient Light
indicator on the heater is slowly
flashing (once per second),
then press on the orange
button at the bottom of the
screen to confirm.
This will then transfer the settings to the heater.
2. Select the type eof device as
"Heather"
within
Appliance tab.
5. Enter your WiFi password
and press confirm.
27/ 52
3. Press on the AP mode button
the
Home
in the right of the screen.
6. This will then transfer the
settings to the heater. Wait for
this to complete. If this fails,
retry. If till unsuccessful please
review
section for further help.
the
troubleshooting
Werbung
