UNION GLASHÜTTE/SA. U 7751 Gebrauchsanleitung Seite 14

Use
Winding
Crown in position I, not pulled out
Manual winding is necessary if you have not worn your
watch for some considerable period of time. To restart
it, you only need to turn the crown a few times (clock-
wise), or to tilt your watch from side to side a few
times. To restore your watch's 46 hour power reserve,
around 32 turns of the crown (forward) are required.
When wearing your watch, the automatic device winds
it every time you move your wrist.
Notes
The accuracy may be influenced by the wearing condi-
tions. There is no stop of the crown at full winding.
Setting the time
Crown in position III, pulled out
Pull the crown out to position III carefully; the sec-
onds hand (3) will stop. Turn the crown forwards or
backwards to the desired time, and then push it back
into the rest position I.
Once the hour hand passes the 12 o'clock position,
you can see if it is indicating midnight (date and day will
change) or midday (date and day will not change).
14