PNI DMR R45 Bedienungsanleitung Seite 6

When the battery is charging, the LED lights up red. When the
»
battery is fully charged, the LED lights up green.
3. Radio on/off button and volume control
4. PTT button. Press to transmit, release the key to receive.
5. Multifunctional key 1 (Monitor / Scan)
Long press the key to activate the Monitor function. Press the
»
long key again to deactivate the Monitor function. Note: the
Channel Monitoring function is only available in analog mode.
Briefly press the key to activate the Scan function. Briefly
»
press the key again to exit the Scan function.
6. Multifunctional key 2 (NULL, PRI, CALL)
Programmable key, available only in analog mode.
»
By long pressing repeatedly, two beeps will be heard that
»
indicate the switch of the key to one of the 3 modes: NULL
(no function), PRI function and CALL function.
NULL mode: press the key briefly to cancel the function
»
PRI mode: short press the key to activate/deactivate the PRI
»
function (priority channel). After the priority channel has
been set in the menu, briefly press the multifunction key to
switch to the priority channel. The PRI icon will appear on the
screen. Briefly press the key again to exit the priority channel
and return to the previously used channel.
CALL mode: press the key briefly to make a call. Duration
»
between calls: 30 seconds.
7. Screen
8. Menu key
Press the MENU key to enter the menu.
»
Press the MENU key again to navigate through the submenus.
»
Press the Up and Down keys to select the desired option for a
»
particular submenu.
User manual 6