PNI DMR R45 Bedienungsanleitung Seite 10

02. Scan
Scanning can be activated in two ways:
- through the menu (MENU - Scan): select the On option. You will
hear the voice prompt "Scanning on". The radio automatically returns to
the main interface. On the screen, in the upper right corner, the Scan
icon appears. The orange LED flashes and the channels are continuously
displayed on the screen.
- by briefly pressing the multifunctional key 1.
Scanning can be stopped by pressing the up or down keys on the radio,
accessing the Scan menu and choosing the Off option or by briefly
pressing the multifunctional key 1.
03. Zones
Select the target area. After selecting the zone, the radio will
automatically return to the main interface and remain on the channel
of the selected zone. Zone 1 (digital channel), Zone 2 (analog channel)
04. Bluetooth
Select the On option to activate the Bluetooth function. You will hear
the voice prompt "On". On the screen, in the upper right corner, the
Bluetooth icon appears.
Select the option Connect to connect, Disconnect to disconnect and
Pair Clear to delete all pairings.
05. PRI Channel
Select the priority channel. Options: None, 01-99.
Note: function available only in analog mode.
User manual 10